The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The GAC Motor GM6 made its debut at the 2018 Chengdu Auto Show, with a length, width, and height of 4780mm, 1860mm, and 1730mm respectively, and a wheelbase of 2810mm; The seats are arranged in a 7-seater layout of 2, 2, and 3. In terms of power, the GAC Motor GM6 is equipped with GAC Motor's 1.5TGDI engine, with a maximum expected power of 171 horsepower The GAC Trumpchi GM6 was launched at the Beijing Auto Show in November
Copyright © 2021.Company name All rights reserved.