Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

BYD F3DM introduce

The BYD F3DM reaches the power output level of a 3.0L engine. In the initial stage, the instantaneous acceleration performance of the BYD DM dual-mode electric vehicle far exceeds the level that a 3.0L engine can achieve. It is reported that the pure electric range of the BYD DM dual-mode electric vehicle equipped with iron batteries reaches 100 kilometers. The iron batteries developed by the company also remain stable in extreme high and low temperatures and collision experiments, It reflects a high safety index. In addition to high capacity and good safety, the iron battery of this car greatly reduces material costs, further accelerating its commercialization pace The BYD F3DM is the latest model in the F3 series