LUK introduce

The clutch three piece set refers to the clutch friction plate, clutch pressure plate, clutch release bearing. The clutch pressure plate is the most important component in the clutch assembly, which directly determines whether the clutch is installed trembling, heavy, and used for a long time. The quality of the clutch friction plate will determine the overall service life and shock absorption and noise reduction effect of the clutch. The clutch release bearing is an important part of the clutch release system, Its quality determines the separation efficiency of the clutch system and the wear rate of the pressure plate separation)

Installation method of clutch three piece set

This advocates installation in car repair shops, as the installation method for each car is different: 1. Clutch pressure plate: it is a crucial structure on the clutch, and its function plays a crucial role in driving safety of the car; 2. The clutch is located in the flywheel housing between the engine and transmission. The clutch assembly is screwed onto the rear plane of the flywheel, and the output shaft of the clutch is the input shaft of the transmission. During the driving process of the car, the driver can press or release the clutch pedal as needed, temporarily separating the engine and transmission and gradually engaging them to cut off or transmit power input from the engine to the transmission; 3. The clutch is a common component in mechanical transmission that can be disengaged or engaged in the transmission system at any time. The general requirement is smooth engagement, rapid and thorough separation; Easy to adjust and maintain, with small external dimensions; Small weight, good wear resistance, and sufficient heat dissipation capacity; Convenient and labor-saving, commonly used methods include clamp type and friction type

Jinbei S70 introduce

On April 20, 2017, at the Shanghai Auto Show, Brilliance Huarui released the Jinbei S70 model, which can be seen as the 7-seater version of the current Tiaz. In terms of appearance, the overall design of the new car is consistent with the current Tiaz, and we are all familiar with it. The wheelbase of both cars is 2725mm. Unlike the Tiaz, the Jinbei S70 adopts a 2-3 2 7-seater layout. The official statement is that the third row seats can easily accommodate people who are 1.75m tall. In terms of interior, The Jinbei S70 has undergone some adjustments by adding the popular floating center console screen. The center console adopts a brown/black dual color color scheme and symmetrical layout, which looks relatively conventional. In terms of configuration, the Jinbei S70 is equipped with keyless entry and one key start. 360 panoramic imaging and other configurations. In terms of power, the car is equipped with a 1.5T engine, with a maximum power of 154 horsepower and a peak torque of 220 Nm. The transmission system is matched with a 6-speed manual transmission