The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
On April 20, 2017, at the Shanghai Auto Show, Brilliance Huarui released the Jinbei S70 model, which can be seen as the 7-seater version of the current Tiaz. In terms of appearance, the overall design of the new car is consistent with the current Tiaz, and we are all familiar with it. The wheelbase of both cars is 2725mm. Unlike the Tiaz, the Jinbei S70 adopts a 2-3 2 7-seater layout. The official statement is that the third row seats can easily accommodate people who are 1.75m tall. In terms of interior, The Jinbei S70 has undergone some adjustments by adding the popular floating center console screen. The center console adopts a brown/black dual color color scheme and symmetrical layout, which looks relatively conventional. In terms of configuration, the Jinbei S70 is equipped with keyless entry and one key start. 360 panoramic imaging and other configurations. In terms of power, the car is equipped with a 1.5T engine, with a maximum power of 154 horsepower and a peak torque of 220 Nm. The transmission system is matched with a 6-speed manual transmission
Copyright © 2021.Company name All rights reserved.