front fender introduce

The function of the front wheel fender is to ensure that there is enough space for the front wheel, while the rear fender does not have the problem of wheel rotation and collision, so it is mainly curved. Compared with the front fender, it is easy to be damaged during driving. In order to prevent sand, stones or mud rolled up by the wheels from splashing onto the bottom of the car, the fender is mostly made of plastic material, making it more cushioning. The fender is located in the semi-circular position directly above the tire, Vanes, also known as fenders, are divided into front and rear fenders according to their installation positions. They refer to a type of cover on both motor and non motor vehicles. Vanes include: front fender, front fender lining, front fender lights, rear fender lights, radiator frame. The function of a fender is to reduce the drag coefficient through fluid dynamics, making driving smoother; 2. In the process of driving a car, avoid sand, stones, and mud that are rolled up by the wheels from splashing onto the bottom of the car compartment. The fender is configured above the wheels of the vehicle as the outer panel on the side of the vehicle, and is formed by resin. The fender is formed by resin from the outer panel part and the reinforcement part as a whole. Assist the automotive parts platform to provide ordering services for the original parts of the front fender of various vehicle models)

Front fender replacement tutorial:

Front fender replacement tutorial: 1. First, align the support points at the bottom of the car with a jack, then raise the car chassis and remove the tires; 2. Subsequently, remove the screws and buckles that fix the inner lining of the leaf panel and remove the damaged leaf panel. Of course, we also need to clean the mud and sand underneath the leaf panel; 3. Finally, follow the opposite steps of disassembling the blade to install the new blade, and you are done; 4. Secondly, we also need to identify the cause of the broken inner lining of the fender, otherwise it will be a situation of "treating the symptoms but not the root cause" after replacement. However, the most likely reason is due to the lower limit size (ensuring the maximum limit space for tire rotation and jumping) When the car is driving on bumpy roads due to being too small, it is easy for the tires to push against the fender lining and crack for a long time. However, it is not a problem. At this time, we only need to increase the lower arm limit to avoid a "hard collision" between the tire and the fender lining

Jinbei S70 introduce

On April 20, 2017, at the Shanghai Auto Show, Brilliance Huarui released the Jinbei S70 model, which can be seen as the 7-seater version of the current Tiaz. In terms of appearance, the overall design of the new car is consistent with the current Tiaz, and we are all familiar with it. The wheelbase of both cars is 2725mm. Unlike the Tiaz, the Jinbei S70 adopts a 2-3 2 7-seater layout. The official statement is that the third row seats can easily accommodate people who are 1.75m tall. In terms of interior, The Jinbei S70 has undergone some adjustments by adding the popular floating center console screen. The center console adopts a brown/black dual color color scheme and symmetrical layout, which looks relatively conventional. In terms of configuration, the Jinbei S70 is equipped with keyless entry and one key start. 360 panoramic imaging and other configurations. In terms of power, the car is equipped with a 1.5T engine, with a maximum power of 154 horsepower and a peak torque of 220 Nm. The transmission system is matched with a 6-speed manual transmission