Automobile fuel tank is the full name of automobile fuel tank. Currently, with the development of the automobile industry and the revitalization of the domestic automobile industry, the demand for automobile fuel tanks by major automobile production enterprises is showing a significant growth trend; Iron fuel tanks and aluminum alloy fuel tanks. With the development of various new materials, the rust prevention problem of iron fuel tanks has become the biggest problem in fuel tank quality, especially in today's emphasis on environmental protection. In terms of heavy-duty trucks, the problem that affects the promotion of new vehicle models is the quality of Chinese oil, Among them, the quality of the fuel tank, which is a key component, has become a focus. Aluminum alloy fuel tanks not only meet the strength requirements but also have significant advantages in corrosion resistance compared to iron and other new materials. They have also become the preferred choice for large passenger cars and heavy-duty trucks with high fuel consumption and high fuel quality requirements. Automotive fuel tanks are divided into ordinary tanks and heated tanks according to their functions)
1) Lift the fuel tank and install fixing bolts. Tighten to the specified torque. 2) Connect the fuel hose to the fuel tank. 3) Install the parking brake control cable and fuel filter bracket. 4) Lower the car. 5) Connect the filter hose and vent hose. 6) Connect the wiring harness and install the inspection hole cover. 7) Connect the flipping limit valve and partition. 8) Install the rear seat and luggage rack
The Jianghuai iEVS4 is an electrified upgrade based on the gasoline version of the Ruifeng S4. In terms of appearance, everyone should not be too unfamiliar with it. The overall appearance maintains the original design style of the Ruifeng S4, but makes some changes based on the characteristics of pure electric vehicles. The grille is no longer hollow, but adopts a fully enclosed design, with DC fast charging and AC slow charging interfaces below the middle cover plate. In terms of headlights, except for the lowest configuration model which uses halogen light sources, All other configurations use LED light source headlights and are equipped with lenses. The side dual cultivation creates a floating roof effect, with body dimensions of 4410/1800/1660mm in length, width, and height, and a wheelbase of 2620mm. The exterior rearview mirror only supports electric adjustment and does not support electric folding. In addition, the car does not have a 360 degree imaging function
Copyright © 2021.Company name All rights reserved.