Rear bumper leather introduce

The exterior decoration of the metal anti-collision crossbeam. The function of the rear bumper: 1. Safety protection function; 2. Relieve external impact forces; 3. The role of protecting pedestrians; 4. Decorative; 5. Improve the aerodynamic performance of the vehicle. The rear bumper is composed of an outer panel, cushioning material, and crossbeam, which have certain elasticity and good force absorption characteristics. It is a safety device that absorbs and mitigates external impact forces and protects the rear of the vehicle)

The method for replacing the rear bumper is:

The method for replacing the rear bumper is as follows: 1. Remove the cover, clip, screw, and bolt of the rear bumper; 2. Pull the bumper in the wheel arch area; 3. Remove the bumper from the side and replace it with a bumper of the same model. The rear bumper is a crossbeam under the rear light

JAC iEVS4 introduce

The Jianghuai iEVS4 is an electrified upgrade based on the gasoline version of the Ruifeng S4. In terms of appearance, everyone should not be too unfamiliar with it. The overall appearance maintains the original design style of the Ruifeng S4, but makes some changes based on the characteristics of pure electric vehicles. The grille is no longer hollow, but adopts a fully enclosed design, with DC fast charging and AC slow charging interfaces below the middle cover plate. In terms of headlights, except for the lowest configuration model which uses halogen light sources, All other configurations use LED light source headlights and are equipped with lenses. The side dual cultivation creates a floating roof effect, with body dimensions of 4410/1800/1660mm in length, width, and height, and a wheelbase of 2620mm. The exterior rearview mirror only supports electric adjustment and does not support electric folding. In addition, the car does not have a 360 degree imaging function