The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
Carlson Carlsson mainly focuses on vehicle modification, from exterior aerodynamic kits to more advanced interiors, as well as comprehensive improvements in performance compared to the original Mercedes Benz models. Just last month, Carlson Carlsson officially announced its entry into the Chinese market and settled in Chengdu. The first model to enter the domestic market was the Carlson CCA 22, built on the Mercedes Benz CLA 220 4Matic. Carlson Carlson entered the domestic market in the form of imported vehicles, Can effectively convey Carlson's car making philosophy and bring a unique experience that sets it apart from ordinary Mercedes Benz models
Copyright © 2021.Company name All rights reserved.