Reverse mirror assembly introduce

On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)

Installation method of reverse mirror assembly/rearview mirror assembly

1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo

Cadillac CT5 introduce

The Cadillac CT5 was officially released at the 2019 New York Auto Show and was launched in overseas markets in August; In terms of appearance, the CT5 also follows Cadillac's latest exterior design, which is divided into two styles: the sports version and the fashion version, with a sleek design. The Cadillac CT5 adopts an electronic gear lever, and the control knob of the multimedia system is located behind the gear lever. In terms of power, the Cadillac CT5 is equipped with a 2.0T turbocharged engine and a 3.0T twin turbocharged engine. The transmission part is matched with a 10AT gearbox, and high-end models will also provide a four-wheel drive system