The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The Cadillac XT5 is a luxury SUV under the Cadillac brand. It was first launched globally at the Dubai International Auto Show in November 2015 and was launched in China on April 12, 2016. The Cadillac XT5 is positioned as a mid size luxury SUV, with its main competitors being Mercedes Benz GLC, BMW X3, Volvo XC60, Lexus RX, etc. In September 2018, SAIC General Motors Co., Ltd. decided to start from October 20, 2018, Recall a total of 144713 Cadillac XT5 vehicles produced between November 20, 2015 and September 18, 2018, for the 2017 to 2019 models
Copyright © 2021.Company name All rights reserved.