Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
The Cadillac XT5 is a luxury SUV under the Cadillac brand. It was first launched globally at the Dubai International Auto Show in November 2015 and was launched in China on April 12, 2016. The Cadillac XT5 is positioned as a mid size luxury SUV, with its main competitors being Mercedes Benz GLC, BMW X3, Volvo XC60, Lexus RX, etc. In September 2018, SAIC General Motors Co., Ltd. decided to start from October 20, 2018, Recall a total of 144713 Cadillac XT5 vehicles produced between November 20, 2015 and September 18, 2018, for the 2017 to 2019 models
Copyright © 2021.Company name All rights reserved.