The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)
(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission
The Cadillac XT5 is a luxury SUV under the Cadillac brand. It was first launched globally at the Dubai International Auto Show in November 2015 and was launched in China on April 12, 2016. The Cadillac XT5 is positioned as a mid size luxury SUV, with its main competitors being Mercedes Benz GLC, BMW X3, Volvo XC60, Lexus RX, etc. In September 2018, SAIC General Motors Co., Ltd. decided to start from October 20, 2018, Recall a total of 144713 Cadillac XT5 vehicles produced between November 20, 2015 and September 18, 2018, for the 2017 to 2019 models
Copyright © 2021.Company name All rights reserved.