On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)
1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo
The Leopard CT7 is a new pickup truck for Leopard cars. The Leopard CT7 comes in two models: standard double row and large double row, with a standard double row body size of 5310 × one thousand eight hundred and thirty-five × 1800mm, with a wheelbase of 3105mm; The body size of the large double row model is 5585 × one thousand eight hundred and thirty-five × 1800mm, with a wheelbase of 3380mm. The new car has a rugged appearance and is mainly equipped with practical interior features. The vehicle is equipped with a 1.9T diesel engine, with a maximum power of 136 horsepower and a peak torque of 300 Nm, matched with a 5-speed manual transmission. The body structure is non load bearing, with two wheel drive and four-wheel drive modes. The new car was officially launched on January 12, 2017, equipped with a 1.9T diesel engine and comes in five models: dual row/large dual row, two wheel drive/four-wheel drive
Copyright © 2021.Company name All rights reserved.