The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
On November 1, 2019, at the China International Commercial Vehicle Exhibition held in Wuhan, Iveco Ousheng's 2020 National VI products were officially launched. The short axle comfortable version of the Super Rui series started at 149900 yuan, the long axle short suspension comfortable version of the Shangrui series started at 185900 yuan, the short axle comfortable version of the Yunrui series started at 146900 yuan, and the long axle 4.5-ton luxury version of the professional chassis series started at 171900 yuan. It covers various application scenarios of light multifunctional commercial vehicles
Copyright © 2021.Company name All rights reserved.