Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

explorer introduce

On November 14, 2016, SAIC General Motors announced that the new domestically produced Chevrolet Equinox model was officially named "Explorer". The new car has been officially launched at SAIC General Motors Wuhan base and was released on the eve of the 2016 Guangzhou Auto Show on the night of the Chevrolet brand. In March 2017, the Explorer 1.5T and 2.0T models began pre-sales. In September 2018, SAIC General Motors Co., Ltd. decided to start from October 20, 2018, Recall 98037 Chevrolet Explorer vehicles produced between September 5, 2016 and September 18, 2018, totaling 2018 to 2019