twc introduce

What is a three-way catalytic converter? A three-way catalytic converter is the most important external purification device installed in a car's exhaust system, which can remove CO from the car's exhaust Harmful gases such as HC and NOx are converted into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. Simply put, they purify the exhaust gas. The working principle of a three-way catalytic converter is as follows: 1. When the engine exhaust gas is discharged through the exhaust pipe, due to the catalytic effect of the purifying agent in the three-way catalytic converter, the activity of C0, HC, and NOx is enhanced, leading to oxidation and reduction reactions. 2. C0 is oxidized to colorless and non-toxic C02 at high temperatures, HC compounds are oxidized to H20 and C02 at high temperatures, while NOx is reduced to N2 (nitrogen) and 02 (oxygen), thereby purifying the engine's exhaust emissions)

Method for installing a three-way catalytic converter

Method for installing a three-way catalytic converter: ① Use 8 bolts to install 2 heat shields on the new preheated three-way catalytic converter. ② Install the new gasket, protective ring, and sealing gasket onto the preheated three-way catalytic converter. ③ Use 3 bolts and 2 new nuts to install the preheated three-way catalytic converter with a tightening torque of 29N. m. ④ Use bolts and nuts to install the exhaust manifold bracket with a tightening torque of 42N. m. ⑤ Use bolts and nuts to install the No.1 exhaust manifold bracket with a tightening torque of 42N. m. ⑥ Connect the secondary oxygen sensor connector

explorer introduce

On November 14, 2016, SAIC General Motors announced that the new domestically produced Chevrolet Equinox model was officially named "Explorer". The new car has been officially launched at SAIC General Motors Wuhan base and was released on the eve of the 2016 Guangzhou Auto Show on the night of the Chevrolet brand. In March 2017, the Explorer 1.5T and 2.0T models began pre-sales. In September 2018, SAIC General Motors Co., Ltd. decided to start from October 20, 2018, Recall 98037 Chevrolet Explorer vehicles produced between September 5, 2016 and September 18, 2018, totaling 2018 to 2019