Differential assembly of transfer case introduce

The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)

Installation method for differential assembly of transfer case

1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear

explorer introduce

On November 14, 2016, SAIC General Motors announced that the new domestically produced Chevrolet Equinox model was officially named "Explorer". The new car has been officially launched at SAIC General Motors Wuhan base and was released on the eve of the 2016 Guangzhou Auto Show on the night of the Chevrolet brand. In March 2017, the Explorer 1.5T and 2.0T models began pre-sales. In September 2018, SAIC General Motors Co., Ltd. decided to start from October 20, 2018, Recall 98037 Chevrolet Explorer vehicles produced between September 5, 2016 and September 18, 2018, totaling 2018 to 2019