tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

explorer introduce

On November 14, 2016, SAIC General Motors announced that the new domestically produced Chevrolet Equinox model was officially named "Explorer". The new car has been officially launched at SAIC General Motors Wuhan base and was released on the eve of the 2016 Guangzhou Auto Show on the night of the Chevrolet brand. In March 2017, the Explorer 1.5T and 2.0T models began pre-sales. In September 2018, SAIC General Motors Co., Ltd. decided to start from October 20, 2018, Recall 98037 Chevrolet Explorer vehicles produced between September 5, 2016 and September 18, 2018, totaling 2018 to 2019