Front door interior panel introduce

The part names of the interior panel of the left front door, from top to bottom, are: left front door glass, left front mirror, left front glass sealing strip, those with decorative strips on the outside are called left front door decorative strip. The left front door is decomposed into left front door, mirror, glass, door lock, door glass controller, door glass elevator, mirror controller, left front door interior panel, handle, etc. The car is structurally divided into frame, outer panel, chassis, engine, interior, glass, tire, and is functionally divided into electrical system and driving system Driving system, oil and gas system, filtration system, control system, cooling system)

Installation method of front door interior panel/rear door interior panel

1、 Prepare tools and work vehicles or workbenches. 2. Open the car door to its maximum size for easier operation of the hinge support. Place a bracket at the lower edge of the car door to support the weight of the door and protect it. Unscrew the window glass. In this example, the disassembly of the car door will be mainly introduced. If the car door needs to be disassembled before disassembly, the outdoor rearview mirror should be removed. 3. Disconnect the wire connector between the car door and the vehicle body to separate the door wiring harness, If necessary, first remove the inner decorative parts on the pillar. 4. Remove the clamp at the bottom of the door stopper locking pin and extract the locking pin from the hole. 5. Hold the door and remove the connecting bolt of the door hinge support. After removing the door, place it vertically on a padded surface. If only the door needs to be removed for maintenance, it is recommended to complete the disassembly of the door by removing the hinge connecting bolt instead of the fixed bolt, This can reduce the adjustment work of the car door. 6. Check the sleeve of the car door chain, replace it if necessary, lubricate the hinge joint, place the car door back on the hinge support, and reinstall the bolts. 7. Connect the door limiter, install the stop lock pin and locking plate, and connect the electrical plug. 8. Close the car door, check if it is aligned, and if there is no problem, tighten the hinge fixing bolts. 9. Note that if the front door is disassembled and assembled, it is necessary to install the rearview mirror back

ZTE Changling introduce

The 2012 Changling pickup truck adheres to the simple and resolute beauty of the Isuzu D-MAX model, with smooth external lines showcasing its unique charm of toughness and masculinity. The transparent and bright colored crystal diamond front headlights are embedded on the full and plump front of the car, making the front face thick and full of weight, revealing its dominance The width of the vehicle body is 50mm wider than that of vehicles in the same class, providing a spacious and comfortable driving and riding space. At the same time, the height of the cargo compartment has increased by 80mm on the basis of widening, giving it more advantages in carrying capacity The exquisite interior design, spacious and comfortable interior space, and humanized control system allow you to fully experience the driving experience of a sedan. High end configurations such as electric window openers, power steering, and environmentally friendly air conditioning are comfortable, convenient, and practical. The mature ZTE pickup truck chassis platform with a market share of 350000 vehicles has been adopted, and its excellent handling has passed the strict test of various road conditions at home and abroad, With all-terrain capability, you can choose a large double row pickup truck and an extended 350mm rear cargo compartment, which provides more carrying capacity and brings you more wealth The diesel power is equipped with the Austrian AVL technology 4D25 electronic control National III diesel engine, which is perfectly matched with the vehicle. The constant fuel consumption at 60km/h is only 5.36L/100km. The gasoline power uses Toyota technology 491Q-ME electronic injection engine, which has a total installed capacity of over 1 million units and is currently the most mature engine in China with the highest market share