Rear wheel fender introduce

The leaf plate includes: front leaf plate, front leaf plate lining, front leaf plate light, rear leaf plate light, radiator frame. The leaf plate refers to a type of cover on motor vehicles and non motor vehicles (a slightly protruding, semi-circular small piece above the wheel), and the cover, as the name suggests, is the shell that covers the outside of motor vehicles and non motor vehicles. It conforms to fluid mechanics and reduces the wind resistance coefficient, Make the car run more smoothly. The fender, also known as the fender, is located outside the body of the wheels. Its function is to reduce the drag coefficient of the fender air outlet according to fluid dynamics, making the car run more smoothly. According to the installation position, it is divided into front fender and rear fender. The front fender is installed above the front wheel, because the front wheel has steering function, it is necessary to ensure the maximum limit space when the front wheel rotates, Therefore, designers will use a "wheel runout chart" to verify the design dimensions of the fender based on the selected tire model size. The rear fender does not have the problem of wheel rotation collision, but due to aerodynamic considerations, the rear fender slightly arches outward. Secondly, the front fender can prevent sand, stones, and mud rolled up by the wheels from splashing onto the bottom of the car during driving, reducing damage and corrosion to the chassis, The materials used are required to have weather aging resistance and good formability. Currently, many car front fenders are made of plastic materials with a certain degree of elasticity, making them more cushioning and safer)

Installation method of rear fender/rear fender assembly

1. Start the car and turn all wheels to the right, then turn off the engine and remove the car key. Then open the engine hood and disconnect the negative pole of the battery. Use a Phillips screwdriver to remove the four screws on the front bumper. Use a 5mm hex wrench to remove the two screws on the side of the front bumper; 2. Use a Phillips screwdriver and a 7mm socket to remove the three screws under the right side of the front bumper fascia. Use a Phillips screwdriver and a 7mm socket to remove the three screws of the fender. Remove the splash guard; 3. Use a small ratchet wrench, extension rod, and 7mm socket to remove the screws at the bottom of the front bumper. Use a square screwdriver and 7mm socket to remove the screws connecting the fender and bumper. Use a large ratchet wrench and 10mm socket to remove the four bolts behind the front headlight; 4. Remove the plug of the front headlight assembly. Remove the front headlight assembly. Remove the screws connecting the splash guard to the fender, and the fender can be removed; 5. The fender is located outside the vehicle body of the wheels. Its function is to reduce the drag coefficient based on fluid dynamics, making the vehicle travel smoother. It is further divided into front fender and rear fender according to the installation position, with the front fender installed above the front wheel; 6. Due to the steering function of the front wheels, it is necessary to ensure the maximum limit space when the front wheels rotate. Therefore, the designer will use the "wheel runout diagram" based on the selected tire model size to verify the design size of the fender

ZTE Changling introduce

The 2012 Changling pickup truck adheres to the simple and resolute beauty of the Isuzu D-MAX model, with smooth external lines showcasing its unique charm of toughness and masculinity. The transparent and bright colored crystal diamond front headlights are embedded on the full and plump front of the car, making the front face thick and full of weight, revealing its dominance The width of the vehicle body is 50mm wider than that of vehicles in the same class, providing a spacious and comfortable driving and riding space. At the same time, the height of the cargo compartment has increased by 80mm on the basis of widening, giving it more advantages in carrying capacity The exquisite interior design, spacious and comfortable interior space, and humanized control system allow you to fully experience the driving experience of a sedan. High end configurations such as electric window openers, power steering, and environmentally friendly air conditioning are comfortable, convenient, and practical. The mature ZTE pickup truck chassis platform with a market share of 350000 vehicles has been adopted, and its excellent handling has passed the strict test of various road conditions at home and abroad, With all-terrain capability, you can choose a large double row pickup truck and an extended 350mm rear cargo compartment, which provides more carrying capacity and brings you more wealth The diesel power is equipped with the Austrian AVL technology 4D25 electronic control National III diesel engine, which is perfectly matched with the vehicle. The constant fuel consumption at 60km/h is only 5.36L/100km. The gasoline power uses Toyota technology 491Q-ME electronic injection engine, which has a total installed capacity of over 1 million units and is currently the most mature engine in China with the highest market share