Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Baojun 630 introduce

The Baojun 630 is the first mid size sedan under the new passenger car brand of SAIC-GM Wuling - Baojun. On April 13, 2013, the 2013 Baojun 630 was officially launched, with a total of two displacement 10 models, priced in the range of 62800 to 95800 yuan. The updated model launched this time mainly made minor changes to the exterior and interior. The length, width, and height of the Baojun 630 are 4597mm, 1736mm, and 1462mm, respectively, The six highlights of the Baojun 630 include a wheelbase of 2640mm, a sporty appearance, global quality standards, universal safety design, all-around power control, comprehensive applicability, and overall economic and environmental protection