Differential assembly of transfer case introduce

The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)

Installation method for differential assembly of transfer case

1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear

Baojun 630 introduce

The Baojun 630 is the first mid size sedan under the new passenger car brand of SAIC-GM Wuling - Baojun. On April 13, 2013, the 2013 Baojun 630 was officially launched, with a total of two displacement 10 models, priced in the range of 62800 to 95800 yuan. The updated model launched this time mainly made minor changes to the exterior and interior. The length, width, and height of the Baojun 630 are 4597mm, 1736mm, and 1462mm, respectively, The six highlights of the Baojun 630 include a wheelbase of 2640mm, a sporty appearance, global quality standards, universal safety design, all-around power control, comprehensive applicability, and overall economic and environmental protection