The clutch three piece set refers to the clutch friction plate, clutch pressure plate, clutch release bearing. The clutch pressure plate is the most important component in the clutch assembly, which directly determines whether the clutch is installed trembling, heavy, and used for a long time. The quality of the clutch friction plate will determine the overall service life and shock absorption and noise reduction effect of the clutch. The clutch release bearing is an important part of the clutch release system, Its quality determines the separation efficiency of the clutch system and the wear rate of the pressure plate separation)
This advocates installation in car repair shops, as the installation method for each car is different: 1. Clutch pressure plate: it is a crucial structure on the clutch, and its function plays a crucial role in driving safety of the car; 2. The clutch is located in the flywheel housing between the engine and transmission. The clutch assembly is screwed onto the rear plane of the flywheel, and the output shaft of the clutch is the input shaft of the transmission. During the driving process of the car, the driver can press or release the clutch pedal as needed, temporarily separating the engine and transmission and gradually engaging them to cut off or transmit power input from the engine to the transmission; 3. The clutch is a common component in mechanical transmission that can be disengaged or engaged in the transmission system at any time. The general requirement is smooth engagement, rapid and thorough separation; Easy to adjust and maintain, with small external dimensions; Small weight, good wear resistance, and sufficient heat dissipation capacity; Convenient and labor-saving, commonly used methods include clamp type and friction type
In terms of exterior design, the new K05S is still very fashionable. Although it has similar shapes, its body proportion and exquisite shape look very pleasing. Especially in the front face, it is equipped with a fog light group as standard, which not only makes the whole car look more fashionable than boutique models such as Wuling Light, but also plays a good auxiliary lighting role. As for the interior, there is really nothing to see about this type of car, The entire interior is made of hard plastic, and the center console is equipped with a multimedia nose, without even displaying the time; This needs post processing. It costs about 600 or 700 yuan to add an ordinary central control screen and a recorder outside the auto parts city. Then his internal storage compartment is relatively small, and the co pilot's seat can't be adjusted back and forth. The comfort is really average. The main thing is that he doesn't have a tachometer and power steering, which is really inconvenient. The power steering is about 1500 yuan later
Copyright © 2021.Company name All rights reserved.