Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Dongfeng Xiaokang K05S introduce

In terms of exterior design, the new K05S is still very fashionable. Although it has similar shapes, its body proportion and exquisite shape look very pleasing. Especially in the front face, it is equipped with a fog light group as standard, which not only makes the whole car look more fashionable than boutique models such as Wuling Light, but also plays a good auxiliary lighting role. As for the interior, there is really nothing to see about this type of car, The entire interior is made of hard plastic, and the center console is equipped with a multimedia nose, without even displaying the time; This needs post processing. It costs about 600 or 700 yuan to add an ordinary central control screen and a recorder outside the auto parts city. Then his internal storage compartment is relatively small, and the co pilot's seat can't be adjusted back and forth. The comfort is really average. The main thing is that he doesn't have a tachometer and power steering, which is really inconvenient. The power steering is about 1500 yuan later