Rear wheel fender introduce

The leaf plate includes: front leaf plate, front leaf plate lining, front leaf plate light, rear leaf plate light, radiator frame. The leaf plate refers to a type of cover on motor vehicles and non motor vehicles (a slightly protruding, semi-circular small piece above the wheel), and the cover, as the name suggests, is the shell that covers the outside of motor vehicles and non motor vehicles. It conforms to fluid mechanics and reduces the wind resistance coefficient, Make the car run more smoothly. The fender, also known as the fender, is located outside the body of the wheels. Its function is to reduce the drag coefficient of the fender air outlet according to fluid dynamics, making the car run more smoothly. According to the installation position, it is divided into front fender and rear fender. The front fender is installed above the front wheel, because the front wheel has steering function, it is necessary to ensure the maximum limit space when the front wheel rotates, Therefore, designers will use a "wheel runout chart" to verify the design dimensions of the fender based on the selected tire model size. The rear fender does not have the problem of wheel rotation collision, but due to aerodynamic considerations, the rear fender slightly arches outward. Secondly, the front fender can prevent sand, stones, and mud rolled up by the wheels from splashing onto the bottom of the car during driving, reducing damage and corrosion to the chassis, The materials used are required to have weather aging resistance and good formability. Currently, many car front fenders are made of plastic materials with a certain degree of elasticity, making them more cushioning and safer)

Installation method of rear fender/rear fender assembly

1. Start the car and turn all wheels to the right, then turn off the engine and remove the car key. Then open the engine hood and disconnect the negative pole of the battery. Use a Phillips screwdriver to remove the four screws on the front bumper. Use a 5mm hex wrench to remove the two screws on the side of the front bumper; 2. Use a Phillips screwdriver and a 7mm socket to remove the three screws under the right side of the front bumper fascia. Use a Phillips screwdriver and a 7mm socket to remove the three screws of the fender. Remove the splash guard; 3. Use a small ratchet wrench, extension rod, and 7mm socket to remove the screws at the bottom of the front bumper. Use a square screwdriver and 7mm socket to remove the screws connecting the fender and bumper. Use a large ratchet wrench and 10mm socket to remove the four bolts behind the front headlight; 4. Remove the plug of the front headlight assembly. Remove the front headlight assembly. Remove the screws connecting the splash guard to the fender, and the fender can be removed; 5. The fender is located outside the vehicle body of the wheels. Its function is to reduce the drag coefficient based on fluid dynamics, making the vehicle travel smoother. It is further divided into front fender and rear fender according to the installation position, with the front fender installed above the front wheel; 6. Due to the steering function of the front wheels, it is necessary to ensure the maximum limit space when the front wheels rotate. Therefore, the designer will use the "wheel runout diagram" based on the selected tire model size to verify the design size of the fender

Dongfeng Xiaokang C31 introduce

The Dongfeng Xiaokang C31 is a practical micro truck model that combines strong load-bearing capacity and excellent power. "Big Power, Big Load" is also the promotional slogan tailored by Dongfeng Xiaokang. In terms of appearance, the Dongfeng Xiaokang C31 has strong originality, with a rounded front face design and two chrome plated front air grilles that perfectly match the headlights, full of affinity; In terms of body size, the Dongfeng Xiaokang C31 has obvious advantages compared to competing models, with an external length, width, and height of 4730mm, 1655mm, and 1960mm respectively, and a wheelbase of 3050mm. In addition, the C31 eliminates the second row seat space, and its cargo box length, width, and height can reach 2900mm, 1540mm, and 370mm. The ultra long cargo box size can also meet the demand for loading more and longer items; In terms of power, the Dongfeng Xiaokang C31 is equipped with two types of engines: the "DK12-05" 1.2-liter naturally aspirated engine and the "DK15-06" 1.5-liter naturally aspirated engine. The 1.5-liter engine has a maximum power of 86 kW and a maximum torque of 147.5 Nm. When paired with a 5-speed manual transmission, the comprehensive fuel consumption per 100 kilometers is only 7.5L. Its excellent fuel efficiency and strong power performance also highlight the practicality advantages of the Xiaokang C31