Rear wheel fender introduce

The leaf plate includes: front leaf plate, front leaf plate lining, front leaf plate light, rear leaf plate light, radiator frame. The leaf plate refers to a type of cover on motor vehicles and non motor vehicles (a slightly protruding, semi-circular small piece above the wheel), and the cover, as the name suggests, is the shell that covers the outside of motor vehicles and non motor vehicles. It conforms to fluid mechanics and reduces the wind resistance coefficient, Make the car run more smoothly. The fender, also known as the fender, is located outside the body of the wheels. Its function is to reduce the drag coefficient of the fender air outlet according to fluid dynamics, making the car run more smoothly. According to the installation position, it is divided into front fender and rear fender. The front fender is installed above the front wheel, because the front wheel has steering function, it is necessary to ensure the maximum limit space when the front wheel rotates, Therefore, designers will use a "wheel runout chart" to verify the design dimensions of the fender based on the selected tire model size. The rear fender does not have the problem of wheel rotation collision, but due to aerodynamic considerations, the rear fender slightly arches outward. Secondly, the front fender can prevent sand, stones, and mud rolled up by the wheels from splashing onto the bottom of the car during driving, reducing damage and corrosion to the chassis, The materials used are required to have weather aging resistance and good formability. Currently, many car front fenders are made of plastic materials with a certain degree of elasticity, making them more cushioning and safer)

Installation method of rear fender/rear fender assembly

1. Start the car and turn all wheels to the right, then turn off the engine and remove the car key. Then open the engine hood and disconnect the negative pole of the battery. Use a Phillips screwdriver to remove the four screws on the front bumper. Use a 5mm hex wrench to remove the two screws on the side of the front bumper; 2. Use a Phillips screwdriver and a 7mm socket to remove the three screws under the right side of the front bumper fascia. Use a Phillips screwdriver and a 7mm socket to remove the three screws of the fender. Remove the splash guard; 3. Use a small ratchet wrench, extension rod, and 7mm socket to remove the screws at the bottom of the front bumper. Use a square screwdriver and 7mm socket to remove the screws connecting the fender and bumper. Use a large ratchet wrench and 10mm socket to remove the four bolts behind the front headlight; 4. Remove the plug of the front headlight assembly. Remove the front headlight assembly. Remove the screws connecting the splash guard to the fender, and the fender can be removed; 5. The fender is located outside the vehicle body of the wheels. Its function is to reduce the drag coefficient based on fluid dynamics, making the vehicle travel smoother. It is further divided into front fender and rear fender according to the installation position, with the front fender installed above the front wheel; 6. Due to the steering function of the front wheels, it is necessary to ensure the maximum limit space when the front wheels rotate. Therefore, the designer will use the "wheel runout diagram" based on the selected tire model size to verify the design size of the fender

Peugeot 807 introduce

As the oldest family of car manufacturers in the world, the Peugeot family has led the Peugeot company through the efforts of seven generations, experiencing various historical storms since the 18th century, and has come to this day. More than a century ago, when Armand Peugeot discovered in the UK that two wheelers had become an emerging means of transportation, he had long been producing coffee grinders, saws, and complete sets of tools, Peugeot, whose main business is women's skirts and steel wire skirts, is currently in a period of vigorous development. Following this, bicycles began to become popular in France, and Peugeot's bicycle production happened to replace the outdated steel wire skirts. From small and large wheeled bicycles to the first steam tricycle exhibited at the 1889 World Expo, and then to the world's earliest large-scale automobile production in 1890, The shift of the company's business focus ultimately led to the birth of Peugeot Automobile Company, leaving an important page in the history of world transportation. Since the early 20th century, Peugeot Automobile has galloped on the domestic and international automotive tracks, achieving remarkable results. Peugeot has launched numerous leading models (such as 201203404205 and 206), At the same time, it also achieved extraordinary victories in the field of competition (such as the World Rally Championship in 2000.2001 and 2002). After the 307 won the European "Model of the Year" title in 2002, the 607 achieved another market success. Peugeot began actively conducting business activities in China in the early 20th century. In March 1985, it established a representative office in Beijing. From 1985 to 1997, it established a joint venture with the Guangzhou Municipal Government and produced a total of 101000 sedans from 1985 to 1998, In April 2001, Peugeot returned to the Chinese market and sold imported cars in China through cooperation with five importers. The product series included 206CC, 307SW, 406607, and 807. In October 2002, PSA Group signed an expansion cooperation agreement with Dongfeng Motor Corporation of China, and will subsequently introduce Dongfeng Peugeot brand products to the Chinese market. In 2004, the 307 new sedan was first introduced to the Chinese market