Differential assembly of transfer case introduce

The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)

Installation method for differential assembly of transfer case

1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear

Mercedes-Benz GLC300L introduce

1. Mercedes Benz GLC300L handling and sound insulation. In this regard, since I have not driven any other car before, I don't have much say. Compared to previous small cars, that is much better. After all, the money has also increased a lot (other test drives are like blind dates, so short time and distance, many cannot be seen or tested). 2. Mercedes Benz GLC300L full-time four-wheel drive, compared to the original front wheel drive small car, I don't feel any difference. 3. The seats of Mercedes Benz GLC300L are really soft and comfortable, And there is also leg rest and lumbar support, which is very comfortable. 4. The Mercedes Benz GLC300L has a good seat memory, so there is no need to switch it with my wife. It can be adjusted back and forth, but why do I need to press and hold the adjustment button for a long time? Is it not good to make it only press once and it will be okay