The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
Mercedes Benz S-Class S350L luxury model, car, fuel standard gasoline 97 Comprehensive fuel consumption 10.2 model year 2005 00 00 imported dimensions 5206 * 1871 * 1473 wheelbase 3165 maximum power 200/6000 maximum torque 350/2400-5000 transmission 7 speed AT gears 7 maximum speed 250 body parameters curb weight 1925 seats 5 luggage compartment volume 560 doors 4 front wheelbase 1600 rear wheelbase 1606 approach angle departure angle minimum ground clearance
Copyright © 2021.Company name All rights reserved.