The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
Mercedes Benz S-Class S350L luxury model, car, fuel standard gasoline 97 Comprehensive fuel consumption 10.2 model year 2005 00 00 imported dimensions 5206 * 1871 * 1473 wheelbase 3165 maximum power 200/6000 maximum torque 350/2400-5000 transmission 7 speed AT gears 7 maximum speed 250 body parameters curb weight 1925 seats 5 luggage compartment volume 560 doors 4 front wheelbase 1600 rear wheelbase 1606 approach angle departure angle minimum ground clearance
Copyright © 2021.Company name All rights reserved.