Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
Mercedes Benz S-Class S350L luxury model, car, fuel standard gasoline 97 Comprehensive fuel consumption 10.2 model year 2005 00 00 imported dimensions 5206 * 1871 * 1473 wheelbase 3165 maximum power 200/6000 maximum torque 350/2400-5000 transmission 7 speed AT gears 7 maximum speed 250 body parameters curb weight 1925 seats 5 luggage compartment volume 560 doors 4 front wheelbase 1600 rear wheelbase 1606 approach angle departure angle minimum ground clearance
Copyright © 2021.Company name All rights reserved.