The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)
(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission
Mercedes Benz S-Class S350L luxury model, car, fuel standard gasoline 97 Comprehensive fuel consumption 10.2 model year 2005 00 00 imported dimensions 5206 * 1871 * 1473 wheelbase 3165 maximum power 200/6000 maximum torque 350/2400-5000 transmission 7 speed AT gears 7 maximum speed 250 body parameters curb weight 1925 seats 5 luggage compartment volume 560 doors 4 front wheelbase 1600 rear wheelbase 1606 approach angle departure angle minimum ground clearance
Copyright © 2021.Company name All rights reserved.