On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)
1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo
The BMW 520i is a mid to large-sized sedan produced by BMW. As the lowest configuration of the imported BMW 5 Series, the 520i adopts a lighter body, but the body size has not changed. To match this model, it is a 2.2-liter naturally aspirated L6 cylinder engine with a maximum power output of 170 horsepower and a peak torque of 210 Nm, with a compression ratio of up to 10.8. It can accelerate from 0 to 100 kilometers in just 9.9 seconds and a top speed of 226 kilometers per hour
Copyright © 2021.Company name All rights reserved.