tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

Buick GL8 introduce

Shanghai General Motors Buick GL8 is an automotive brand produced by Shanghai General Motors Co., Ltd. Buick GL8 has dominated the high-end MPV market in China for many years, and the new GL8 is closer to mass production level. The configuration of front and rear headlights and tail lights has been finalized. Compared with the current GL8, the design of the new generation model can be said to be disruptive, incorporating more sedan like smooth line design, The large-sized shield shaped waterfall style chrome plated water tank grille continues the design style of a series of new cars such as the New Regal, New Regal, and Excelle XT