Reverse mirror assembly introduce

On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)

Installation method of reverse mirror assembly/rearview mirror assembly

1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo

NIO ET7 introduce

The NIO ET7 is a pure electric sedan launched by NIO, released in Chengdu on January 9, 2021. The NIO ET7 is equipped with an 8-megapixel high-definition camera, an AQUILA NIO ultra sensing system with ultra long range and high-precision LiDAR, and an ADAM NIO supercomputing platform, achieving full coverage of high-speed, urban, parking, and changing fields, bringing a safe and relaxed point-to-point autonomous driving experience. Moreover, the NIO ET7 inherits high-performance genes, with a drag coefficient as low as 0.23Cd, The acceleration from 100 kilometers per hour is only 3.9 seconds, and the braking distance from 100-0 km/h is only 33.5 meters. The new car has a range of over 1000 kilometers, and is equipped with intelligent air suspension and dynamic damping control as standard across the entire range. Equipped with 4D intelligent body control, it creates a comfortable journey