On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)
1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo
The Junma MEET3 comes from Junma Motors, a subsidiary of Zotye, and will be launched in the market this year. Junma MEET3 is a brand new SUV model. Many of the exterior design details of Junma MEET3 are similar to those of Mercedes Benz models, such as the design of the front headlights being similar to Mercedes Benz GLC, and the construction of the rear end being similar to Mercedes Benz GLA. Junma MEET3 will provide two different tire models, 215/65 R16.235/55 R17. In terms of body size, The new car has a length, width, and height of 4530/1838/1610mm, and a wheelbase of 2685mm
Copyright © 2021.Company name All rights reserved.