Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
Therefore, the front face maintains a high degree of uniformity. The grille part has been restored to the black honeycomb mesh of the three box version from the shallow shield shaped chrome decoration during the Guangzhou Auto Show; The design of the fog light area has also changed from the flat style during the Guangzhou Auto Show to the concave style of the three box version. Compared to the three box model, the lines on the side of the body appear more smooth and dynamic. Considering its two box design,
Copyright © 2021.Company name All rights reserved.