The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
Kaiyi C3R is a small car produced by Kaiyi Automobile. Kaiyi C3R adopts the "shell style" bionic design concept and applies the shell style streamline to the body, with rich lines and a strong sense of sportiness and fashion. As a city car specially designed for young people, the front face of Kaiyi C3R is designed with a strong sense of power and sportiness, with headlights and grille flying wings running through, highlighting the flying wing style logo. The double waistline of the body adopts a shell style upward design, The feature lines naturally protrude and form a curved surface that stretches outward from the vehicle body; The front and rear lights complement each other, connecting the waistline of the entire vehicle, reflecting the overall sense of body design and fully showcasing the vitality and passion of young people. The headlights are designed with a wide angle and sharp edge, and the high and low beam integrated perspective lights, combined with pearl colored eyebrows and LED daytime running lights, become the finishing touch of the entire front face. In addition, the Kaiyi C3R adopts a dual color bright aluminum alloy wheel design, making the overall shape more sporty and fashionable
Copyright © 2021.Company name All rights reserved.