The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
Junpai A70 is a family sedan released by Tianjin FAW at the 2016 Beijing Auto Show. Junpai A70 is a sedan independently developed by FAW Technology Center, equipped with FAW's independently developed CA4GB16 naturally aspirated engine. At the beginning of the design, the performance and quality of the car is benchmarked against the joint-venture cars. Through the integration of Toyota. Volkswagen's technological advantages and the introduction of FAW's AUDIT evaluation system, the quality and technology of the car is comparable to that of the Volkswagen Bora.
Copyright © 2021.Company name All rights reserved.