tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

Yuexiang V5 introduce

The Changan Yuexiang V5 is a new car equipped by Chongqing Changan Automobile based on the chassis design of the Changan Yuexiang and the appearance design of the Mazda 3 Star Cheng. The Changan Yuexiang V5 model has undergone significant changes, with the entire front design, including the hood, headlights, bumper, and fenders, redesigned. The new Yuexiang V5 has confirmed the Star Cheng style front face, and the headlights of the mass-produced model are slightly different from before, with the lower edge appearing more full