On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)
1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo
The exterior design of the Ouliwei comes from Changan Automobile's European and Italian designers. In terms of styling, it has long been the foundation of the concept car, which was the VOSS concept car. However, the difference between the mass-produced version and the concept car is very large. Except for a slight inheritance of the cabin part, the design elements on the concept car are rarely preserved. The front grille is similar to the Acura, and the headlight contour is large, with only the sunken waistline design on the side being preserved, And it is this waistline style that connects the Olivier with the VOSS concept car
Copyright © 2021.Company name All rights reserved.