The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
ALLION is a sedan based on TNGA architecture launched by FAW Toyota in November 2020. On November 20, 2020, FAW Toyota officially launched ALLION at the Guangzhou Auto Show ALLION has a wheelbase of 2750mm and a rear space of 980mm. It is equipped with a 2.0L naturally aspirated engine, with a maximum power of 178 horsepower and peak torque of 210NM. The transmission will be matched with a DirectShift CVT continuously variable transmission
Copyright © 2021.Company name All rights reserved.