Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
The GAC Trumpchi Yingku is the first SUV of the new hybrid technology brand, Julang Hybrid, under GAC Trumpchi's electrification strategy. It was officially unveiled on April 26, 2022, and will launch a dual power model of fuel and hybrid. On August 18, 2022, the GAC Trumpchi Yingku will start pre-sales with six models priced between 132000 yuan and 172000 yuan. On September 25, 2022, the GAC Trumpchi Yingku was officially launched
Copyright © 2021.Company name All rights reserved.