Reverse mirror assembly introduce

On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)

Installation method of reverse mirror assembly/rearview mirror assembly

1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo

Riich M3 introduce

The design of the Ruiqi M3 is a scaled down version of the Ruiqi M1, which is very similar to the Ruiqi M1 and Ruiqi M5 in terms of appearance. However, the black grille on the front face is larger and the design is more simple. The oval shaped headlights replace the peanut shaped headlights on the M1 body. According to data, the body length of the Ruiqi M3 is 3290mm, which is 32cm shorter than the length of the M1 3610mm;