The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The Xiaopeng P5 is the third mass-produced model launched by Xiaopeng Motors, equipped with 32 sensing sensors, XPILOT 3.5 intelligent driving assistance system, and supporting urban NGP function. On April 12, 2021, the Xiaopeng P5 pure electric sedan was officially released. The new car was delivered in the fourth quarter of 2021 and will first appear at the Shanghai International Auto Show on April 19
Copyright © 2021.Company name All rights reserved.