The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The Xiaopeng G9 ultra fast charging fully intelligent SUV is an 800V high-voltage SiC platform mass-produced vehicle. It can be charged for 5 minutes and has a maximum range increase of 200km. The Xiaopeng G9 adopts the X-EEA 3.0 electronic and electrical architecture and Xpower 3.0 power system. The Xiaopeng G9 is an intelligent pure electric SUV released by Xiaopeng Motors. The Xiaopeng G9 is an ultra fast charging fully intelligent pure electric SUV developed by Xiaopeng Motors, which was officially launched in September 2022
Copyright © 2021.Company name All rights reserved.