Differential assembly of transfer case introduce

The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)

Installation method for differential assembly of transfer case

1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear

Dongfeng Xiaokang K07 introduce

Dongfeng Xiaokang K07 is a micro passenger car model developed and produced by Dongfeng Xiaokang Dongfeng Yu'an Vehicle Co., Ltd. Dongfeng Xiaokang New K07 is positioned as a practical large and micro passenger car, with a total length of 4.15 meters, width of 1.65 meters, and height of 1.925 meters. The internal space for cargo can reach 4.7 cubic meters, equipped with a DK12 all aluminum engine, with a power of 64KW and a net power of 61KW. It inherits the advantages of strong power and low fuel consumption of the Dongfeng Xiaokang DK series engine, exquisite interior workmanship, and comfortable seats, It is a practical choice for household and cargo use