The most headache inducing issue in repairing high-end cars is the computer. When repair personnel encounter a computer malfunction, they dare not conclude that it is a problem with the computer. 1. The main function of the engine ECU is to adjust the engine's operation through the execution structure. In terms of use, it is a specialized microcomputer controller for cars, which controls many components on the car ECU stands for Electronic Control Unit ECU can be said to be the brain of the engine. Without it, the engine cannot operate normally. ECU's main function is to adjust the engine's operation through the execution structure. 2. There are many sensors near the engine of a car, and their function is to transmit data back to ECU. After processing by ECU, corresponding mechanisms can be executed to adjust the engine's normal operation. ECU is generally located in the engine compartment, so it can be said that there is no ECU, The engine cannot be used. If there is damage to the sensors near the engine, it can also affect the operation of the engine. 3. The sensors around the engine include the air influenza sensor, intake temperature sensor, etc. It can be said that basically all the sensors of the vehicle are gathered here. If the sensors are damaged, the ECU cannot collect important information about the car, and cannot accurately adjust the engine operation)
The engine wiring harness is generally composed of multiple strands of copper flexible wires inside and wrapped in plastic on the outside. The engine is like a person's heart, and the wiring harness can be called a person's veins. If the veins are not smooth, it can damage health and even cause diseases. Similarly, poor wiring will affect the engine's performance. Regular wiring harness maintenance: Wiring harness maintenance usually uses wiring harness protective agents, which work by forming a protective film on the surface of the engine wire/battery joint, Isolate moisture and avoid oxidation. Due to the high pressure resistance and insulation characteristics of the spray, it can also delay the aging and cracking of rubber and plastic fittings in the cabin, prevent electrical leakage caused by aging of the wiring harness. In addition, the protective film sprayed is not easy to get dirty and easy to wipe, which can keep the cabin clean for a long time
The Dongfeng Xiaokang K07 II is a van under the Dongfeng brand. It has been adjusted at the front grille, and the layered lines on the side of the body are more prominent. Compared with the old model, the exterior design of the Dongfeng Xiaokang K07 II has been slightly modified. The front grille has been adjusted, and the layered lines on the side of the body are more prominent. In terms of size, its length has increased by 80mm, The height has been reduced by 40mm. This time, we are introducing the lowest configuration model of the entire series - the 1.0L practical model. The front and rear bumpers of the car are black, priced at 29800 yuan. In terms of space, when a 176cm tall tester sits in the car, the front headroom is two fists, and the rear legroom is also two fists. The headroom is more than two fists, and the slight headroom has never been a problem. In terms of the trunk, its minimum depth is 1110mm, Folding the rear seats can expand to 1940mm, but folding them requires the use of tools, which is somewhat inconvenient. Due to the limited size of the body, the performance of the trunk can only be described as average compared to the other three models
Copyright © 2021.Company name All rights reserved.