The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
Dongfeng Xiaokang V22 is a model of the "Dongfeng Xiaokang" microcar produced by Dongfeng Yu'an Vehicle Co., Ltd. Dongfeng Xiaokang V22 is a double row seat microcar developed by Dongfeng Xiaokang, with EU standard safety design concept and Dongfeng Automobile chassis manufacturing technology. The V22 is equipped with a new generation of efficient Dongfeng Xiaokang BG10 engine, with a power increase of more than 51KW/L. It has ultra-low fuel consumption, strong power, ultra-low emissions, and ultra durability. The V22 chassis has a ground clearance of 170mm, Far superior to other vehicles in the same class, it effectively prevents friction between the chassis and the ground, and can easily cope with various complex road conditions. The vehicle's chassis has an extended wheelbase and widened wheelbase design, with a wheelbase of up to 2820mm and a wheelbase width of 1410mm, far exceeding other vehicles in the same class The size of the V22 cargo box is 2260X530X1540mm
Copyright © 2021.Company name All rights reserved.