Front wheel horn introduce

The sheep horn of a car is called a "steering knuckle" or "steering knuckle arm", which is the axle head at both ends of the front I-beam that bears the steering function. It is somewhat like a sheep horn, so it is commonly known as a "sheep horn". The steering knuckle, also known as a "sheep horn", is one of the important parts in the steering axle of a car, which can make the car stable and sensitively transmit the direction of travel. The function of the steering knuckle is to transmit and bear the front load of the car, Support and drive the front wheels to rotate around the main pin, causing the car to turn. In the driving state of the car, it bears variable impact loads, so it is required to have high strength. The front axle is equipped with a front axle head on the axle and a steering arm on the seat, just like a sheep horn, so it is called a sheep horn. Generally, it is connected to the front axle by the Liren axle, which is often the case on trucks, Nowadays, cars are all equipped with independent suspensions. Hello, the sheep horn of a car is also known as the steering knuckle assembly. The steering knuckle is one of the main components on the steering axle of a car, which can ensure stable driving and sensitively transmit the direction of travel. The function of the steering knuckle is to bear the load on the front of the car, support and drive the front wheels to rotate around the main pin, and make the car turn. In the driving state of the car, it bears variable impact loads. Therefore, Require it to have high strength. Kingpin inclination angle and front wheel camber angle)

Installation steps for front wheel horn/steering knuckle/steering knuckle arm

If the car horn needs to be replaced, it is recommended to go to a repair shop for replacement. Generally, it cannot be replaced by oneself, which is quite complex. The function of the car horn is as follows: 1. The role of the car horn is to transmit and bear the front load of the car, support and drive the front wheels to rotate around the main pin, and make the car turn. In the driving state of the car, it bears a variable impact load, so it requires high strength; 2. The sheep horn of a car is called the "steering knuckle" or "steering knuckle arm", which is the axle head at both ends of the front I-beam that bears the steering function. It is somewhat like a sheep horn, so it is commonly known as a "sheep horn"; 3. The steering knuckle, also known as the "steering knuckle", is one of the important components of a car's steering, which can make the car run smoothly, stably, and sensitively transmit the direction of travel. Generally, replacing the steering knuckle requires going to a 4S store. The steering knuckle of a car is called the "steering knuckle" or "steering knuckle arm", which is located on both sides of the front I-beam and bears the steering function of the axle head. It is somewhat like a sheep horn, So it is commonly known as "sheep horn". It is recommended to consult the sales personnel or after-sales technicians of 4S dealerships. If the sheep horn is replaced, the wheels need to be disassembled. If the brake cylinder is replaced, the wheels, brake cylinder, steering rod, support arm, and wheel bearings need to be disassembled. After replacement, four-wheel alignment should be done

corolla introduce

The Corolla is the tenth generation straight upgrade product of Toyota COROLLA. Since its release in November last year, the Corolla has received global consumer attention; Now, this globally popular car has settled in FAW Toyota, once again allowing Chinese consumers to experience Toyota's latest technology and driving experience simultaneously. The predecessor of the Corolla was the AE86! The size of the Corolla body has significantly increased compared to the previous generation Corolla, and the entire vehicle has shown an unprecedented "wide and low" trend, creating a spacious interior space; The newly developed dual VVT-i technology with 1.6-liter and 1.8-liter engines will bring a more powerful power experience in the future The Corolla, the tenth generation Corolla that has been officially released in China and has become the focus of attention at the Beijing and Shanghai Auto Show, is the latest model in its series. It was officially launched on November 16, 2006. The Corolla, which is about to be launched by FAW Toyota, has two displacement models: 1.6L and 1.8L. Whether in terms of appearance, configuration, or power, the Corolla, The Corolla has been greatly improved on the basis of the old Corolla. The average fuel consumption of the Corolla is 8.88L/100km, and car owners have expressed that its fuel consumption is low. According to feedback from car owners in 2012, the Corolla has almost no problem with any malfunctions and its quality is very stable. Car owners generally recognize the Corolla in terms of acceleration and handling, Compared to the old Corolla, there has been a significant improvement. However, the 4-speed automatic transmission is slightly stingy. Car owners generally report that the fastest acceleration is achieved from 2nd to 3rd gear