Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
The LAND CRUISER 200 is produced by Toyota. Its appearance inherits the original design DNA and evolves to a new era of "freshness and progressiveness" style. It is a four-wheel drive SUV with a wheelbase of 2850 mm and four-wheel disc brake. The LAND CRUISER 200 uses the latest technologies and technologies such as Crawl Control Low Speed Cruise Driving Assistant System KDSS power adjustable suspension system HAC uphill assist control system The adoption of the VVT-i system not only enhances durability, reliability, and off-road performance, but also achieves a higher sense of luxury and quality, truly becoming a world-class SUV. In addition, the LAND CRUISER 200 Land Cruiser has added a 4.0L model to the original 4.7L model, providing users with more choices
Copyright © 2021.Company name All rights reserved.